Profiles and colours

All NewClick profiles use the same click system and the same rail. Combine profiles and colours freely within one project.

Every panel and slat is 2900 mm long. Rails, clips and stoppers are supplied with the cladding.

NewClick Rhombus Wide

The classic rhombus profile in a wide format. Two battens per panel, strong shadow lines, fast coverage. Visually identical to screw-mounted rhombus cladding, without a single screw.

Panel	152 × 26 × 2900 mm, working width 150 mm
Battens	2 per panel, 67 mm each, 8 mm gap
Coverage	0.435 m² per panel (2.3 panels per m²)
System build-up	41.6 mm on the substructure
Colours	Oak, Teak, Walnut, Black, Weathered oak
Packaging	On request
Warranty	15 years

Product code	Oak	Teak	Walnut	Black	Weathered oak
Rhombus Wide panel	CPW-02-O	CPW-02-T	CPW-02-W	CPW-02-B	CPW-02-A

NewClick Rhombus Narrow

The same profile with three slimmer battens for a finer facade rhythm. Same working width, same rail, same installation. The choice is purely aesthetic.

Panel	152 × 26 × 2900 mm, working width 150 mm
Battens	3 per panel, 40 mm each, 10 mm gap
Coverage	0.435 m² per panel (2.3 panels per m²)
System build-up	41.6 mm on the substructure
Colours	Oak, Teak, Walnut, Black, and bicolour Oak/Black, Teak/Black, Walnut/Black
Packaging	On request
Warranty	15 years

Product code	Oak	Teak	Walnut	Black
Rhombus Narrow panel	CPS-02-O	CPS-02-T	CPS-02-W	CPS-02-B
Bicolour, grooves in black	CPS-02S-O	CPS-02S-T	CPS-02S-W	–

Bicolour: the battens in the wood tone, the grooves in black.

NewClick Barcode 47 / 97 / 147

Three slat widths combined in one facade. An irregular, architectural pattern from one pack, in any order you like. The only click system where three widths fit one rail.

Slats	47, 97 and 147 mm wide, 22 mm thick, 2900 mm long
Working widths	50, 100 and 150 mm, 3 mm joint
Mix pack	1 × 47 + 1 × 97 + 1 × 147 mm = 0.87 m²
Single widths	Each width also available separately for a uniform facade
System build-up	37 mm on the substructure
Colours	Oak, Teak, Walnut, Black
Packaging	On request
Warranty	15 years

Product code	Oak	Teak	Walnut	Black
Mix pack 47 + 97 + 147 mm	CSL-04-O	CSL-04-T	CSL-04-W	CSL-04-B
Single slat 147 mm	CSL-01-O	CSL-01-T	CSL-01-W	CSL-01-B
Single slat 97 mm	CSL-02-O	CSL-02-T	CSL-02-W	CSL-02-B
Single slat 47 mm	CSL-03-O	CSL-03-T	CSL-03-W	CSL-03-B

NewClick Swedish Rebate

Sloped facade cladding

Sloped facade cladding in composite. Horizontal overlapping boards in the classic Swedish rebate look, in a low-maintenance material.

Board	180 × 26 (16 at the narrow edge) × 2900 mm
Profile	Sloped profile, Swedish rebate
System build-up	41.6 mm on the substructure
Colour	Black
Packaging	On request
Finishing profiles	All black Rhombus finishing profiles fit: ALT-09-B, ALM-08-B and SC09-B
Warranty	15 years

Product code	Black
Swedish Rebate board	SP-WP16
Start / end profile, 2900 mmBlack Rhombus finishing profile, also for Swedish Rebate.	ALT-09-B
Aluminium joining / drainage profile, 2900 mmBlack Rhombus finishing profile, also for Swedish Rebate.	ALM-08-B
Universal corner / start / end profile, 2900 mmBlack, also for Swedish Rebate.	SC09-B

Finishing trims and accessories

For all profiles. Hover over a photo, or tap it on a phone, to see it in use.

Aluminium joining / drainage Z-profile
ALM-06 / ALM-08 · 2900 mm

Aluminium start / end profile
ALT-07 / ALT-09 · 2900 mm

Universal composite corner / end profile
SC09 (+ matching mount) · 2900 mm

**Composite finishing board**
MF04 · 2900 mm

The finishing board mounted at a facade opening — **Composite finishing board**
MF04 · 2900 mm

**Stainless steel end clip for cut panels**
CLIP-01

Colour-matched screws for visible fixing positions — **Colour screws for visible fixing positions**
KS40

**Serrated stainless steel stopper to prevent lowering**
ST-10

The stopper on the rail — **Serrated stainless steel stopper to prevent lowering**
ST-10

Aluminium rail with pre-mounted clips — **Aluminium rail system with clip**
AL-08 · 2090 mm

NewClick installation tool — **Installation tool**

The installation tool levering a slat onto the clips — **Installation tool**

Product codes

Use these codes when you order or ask for a quote. Aluminium profiles come in two families: ALT is for the edges of a facade section, ALM is for joining and drainage. Each has a version for Barcode and one for Rhombus. The letter at the end is the colour: O oak, T teak, W walnut, B black, A weathered oak. The black finishing profiles also fit the Swedish Rebate board SP-WP16.

Finishing and accessories	Oak	Teak	Walnut	Black	Weathered oak
For Barcode click slats CSL-01 · 02 · 03 · 04
Aluminium start / end profile, 2900 mmFor the start, end and top of a facade section, around window frames, and if needed the bottom.	ALT-07-O	ALT-07-T	ALT-07-W	ALT-07-B	–
Aluminium joining / drainage Z-profile, 2900 mmTo extend between two panels, or as a drainage profile.	ALM-06-O	ALM-06-T	ALM-06-W	ALM-06-B	–
For Rhombus panels CPW-02 · CPS-02 · CPS-02S The black versions (-B) also fit Swedish Rebate SP-WP16.
Aluminium start / end profile, 2900 mmFor the start, end and top of a facade section, around window frames, and if needed the bottom.	ALT-09-O	ALT-09-T	ALT-09-W	ALT-09-B	ALT-09-A
Aluminium joining / drainage profile, 2900 mmTo extend between two panels, or as a drainage profile.	ALM-08-O	ALM-08-T	ALM-08-W	ALM-08-B	ALM-08-A
For both systems
Universal composite corner / end profile, 2900 mmThe black version (SC09-B) also fits Swedish Rebate SP-WP16.	SC09-O	SC09-T	SC09-W	SC09-B	SC09-A
Composite finishing board, 147 × 2900 mm	MF04-O	MF04-T	MF04-W	MF04-B	MF04-A
Colour screws for visible fixing positions, 40 mm	KS40-O	KS40-TK	KS40-WN	KS40-ZW	–

System parts	Code
Aluminium rail system with clip, 2090 mm	AL-08
Aluminium rails, 2090 mm (extra rails needed)	AL-08-2
Serrated stainless steel stopper, to prevent lowering	ST-10
Stainless steel end clip for cut panels (50 pieces)	CLIP-01

Judge it in your hands

Specs tell half the story. Request a sample box and feel the click yourself.

Request sample box